|
| | |
Forum Newbie
Group: Forum Members
Last Login: 11/27/2009 9:32:29 AM
Posts: 9, Visits: 20 |
| | The netsetup has been reinstalled, however when we click on the Point Admin we get a point admin.exe failed to start message. Cannot figure out why it is doing that. Please advise |
|
|
| | |
Product Management
Group: Moderators
Last Login: 6/18/2010 8:48:43 PM
Posts: 1,646, Visits: 3,264 |
| Go into the winpoint folder on any workstation where Point 7.0 is installed. Copy over the files beginning with "mfc" from the winpoint folder and the file pointadmin.exe.config and paste them into the netsetup folder.
Disclaimer: This post carries no explicit or implied warranty. Nor is there any guarantee that the information contained in this post is accurate. It is offered in the hopes of helping others, but you use it at your own risk. The author will not be liable for any damages that occur as a result of using this post. |
|
|
| | |
Forum Newbie
Group: Forum Members
Last Login: 11/27/2009 9:32:29 AM
Posts: 9, Visits: 20 |
| | 7.0 has not be installed correctly on the server yet all the computers with calyx are still running 6.2b. we got that message after installing the netsetup on server |
|
|
| | |
Product Management
Group: Moderators
Last Login: 6/18/2010 8:48:43 PM
Posts: 1,646, Visits: 3,264 |
| What version of Netsetup is on the server? 7.0 or 6.2?
Disclaimer: This post carries no explicit or implied warranty. Nor is there any guarantee that the information contained in this post is accurate. It is offered in the hopes of helping others, but you use it at your own risk. The author will not be liable for any damages that occur as a result of using this post. |
|
|
| | |
Forum Newbie
Group: Forum Members
Last Login: 11/27/2009 9:32:29 AM
Posts: 9, Visits: 20 |
| |
|
| | |
Product Management
Group: Moderators
Last Login: 6/18/2010 8:48:43 PM
Posts: 1,646, Visits: 3,264 |
| Can you install Point 7.0 on a test computer and copy those files mentioned in my earlier post to the Netsetup folder?
Disclaimer: This post carries no explicit or implied warranty. Nor is there any guarantee that the information contained in this post is accurate. It is offered in the hopes of helping others, but you use it at your own risk. The author will not be liable for any damages that occur as a result of using this post. |
|
|
| | |
Forum Newbie
Group: Forum Members
Last Login: 11/27/2009 9:32:29 AM
Posts: 9, Visits: 20 |
| | none of our user pc's have the pointadmin.exe.config file in there winpoint folder. the other 3 mfc were on there machines |
|
|
| | |
Sepal
Group: Moderators
Last Login: 2 days ago @ 1:30:00 PM
Posts: 1,504, Visits: 12,111 |
| There is not a pointadmin.exe.congif file there is a pdsconnect.exe.config but this is only needed for setting up pds and typically 7.0 does not need them.
Disclaimer: This post carries no explicit or implied warranty. Nor is there any guarantee that the information contained in this post is accurate. It is offered in the hopes of helping others, but you use it at your own risk. The author will not be liable for any damages that occur as a result of using this post.  |
|
|
| | |
Forum Newbie
Group: Forum Members
Last Login: 11/27/2009 9:32:29 AM
Posts: 9, Visits: 20 |
| | so should i just add all the mfc files from a client machine to the winpoint folder on the server? |
|
|
| | |
Sepal
Group: Moderators
Last Login: 2 days ago @ 1:30:00 PM
Posts: 1,504, Visits: 12,111 |
| With netsetup install you would just copy the mfc files into the netsetup directory which should be where setup.exe and pointadmin.exe are.
Disclaimer: This post carries no explicit or implied warranty. Nor is there any guarantee that the information contained in this post is accurate. It is offered in the hopes of helping others, but you use it at your own risk. The author will not be liable for any damages that occur as a result of using this post. |
|
|