Welcome to the Calyx Software Message Boards where you can share ideas and solutions with other Calyx users! Calyx personnel including Tech Support, Development, QA, and Business Planning often visit these message boards unofficially to better understand our customers' needs. To submit your suggestions Click Here.
This discussion forum is a service provided by Calyx Software. Calyx Software does not endorse any particular point of view expressed in this forum or any information provided in it. The use of the information provided by other users in this message board is at your own risk.
Calyx Software Message Board
Home      Members   Calendar   Who's On
Welcome Guest ( Login | Register )
      



ErrorExpand / Collapse
Author
Message
Posted 6/4/2007 2:32:52 PM
Forum Member

Forum MemberForum MemberForum MemberForum MemberForum MemberForum MemberForum MemberForum Member

Group: Forum Members
Last Login: Today @ 5:32:17 PM
Posts: 26, Visits: 75

One of my loan officers gets this image every 5-10 minutes and is immediately kicked out of point. I have searched for the error codes and can't seem to find anything. This is very similar to the error we were getting in 5.3, but since our upgrade to 5.4a Bulid 856.48, this is the only loan officer that continues to have the problem. Can someone point me in the right direction?

Thanks!

Post #5308
Posted 6/5/2007 6:34:33 AM


Sepal

Sepal

Group: Moderators
Last Login: Today @ 4:06:35 PM
Posts: 1,183, Visits: 9,261
That is just the first and rather useless message from windows, if you click cancel you should get a more descriptive message from point as well as a winpointerror.log file in the winpoint folder.

Disclaimer:  This post carries no explicit or implied warranty. Nor is there any guarantee that the information contained in this post is accurate. It is offered in the hopes of helping others, but you use it at your own risk. The author will not be liable for any damages that occur as a result of using this post.
Post #5310
Posted 8/7/2007 10:08:30 AM
Forum Newbie

Forum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum Newbie

Group: Forum Members
Last Login: 8/7/2007 10:46:04 AM
Posts: 2, Visits: 3
I just upgraded to 6.0 using MS XP.

Trying to pull new credit and its giving me e999 error.
So i go to another file and JUST read a credit and it give me
another error and then it states what the other person said.
if i hit ok, Point Crashes. If i hit cancel it goes to another error and says
something about a Debugger.  As i type this, its still frozen!

I use cbc for credit.

HELP!  I need my computer back!

TIA,
Jamie

Post #5571
Posted 8/7/2007 11:52:20 AM


Sepal

Sepal

Group: Moderators
Last Login: Today @ 4:06:35 PM
Posts: 1,183, Visits: 9,261
I think delete the contents of the winpoint/work directory.

Disclaimer:  This post carries no explicit or implied warranty. Nor is there any guarantee that the information contained in this post is accurate. It is offered in the hopes of helping others, but you use it at your own risk. The author will not be liable for any damages that occur as a result of using this post.
Post #5573
« Prev Topic | Next Topic »


Reading This TopicExpand / Collapse
Active Users: 0 (0 guests, 0 members, 0 anonymous members)
No members currently viewing this topic.
Forum Moderators: Emmanuel Huna, Bryan Telford, Jason Beck, Mike Thompson, BetaFisch

PermissionsExpand / Collapse

All times are GMT -8:00, Time now is 9:11pm

Powered by InstantForum.NET v4.1.4 © 2009
Execution: 0.031. 11 queries. Compression Enabled.
© 2005 Calyx Software. All rights reserved.