Importing one .ccs scenario into a template set

Welcome to the Calyx Software Message Boards where you can share ideas and solutions with other Calyx users! Calyx personnel including Tech Support, Development, QA, and Business Planning often visit these message boards unofficially to better understand our customers' needs. To submit your suggestions Click Here.

This discussion forum is a service provided by Calyx Software. Calyx Software does not endorse any particular point of view expressed in this forum or any information provided in it. The use of the information provided by other users in this message board is at your own risk.

Calyx Software Message Board

Home

Members

Calendar

Who's On

Welcome Guest ( Login | Register )

Importing one .ccs scenario into a template...

Rate Topic

Display Mode

Topic Options

Author

Message

bobcarlmtg

Posted 8/16/2006 12:57:31 PM

Forum Newbie

Group: Forum Members
Last Login: 1/4/2007 11:35:46 AM
Posts: 8, Visits: 24

An LO has a specific .ccs on his local machine that he would like to use on PDS. I already set up and imported a template set into the filesync folder. If I just try to copy/paste the single .ccs into there, it does not show up even after a rebuild. What's an easy way to do this for single files.

Obviously I would like to do files of other types; .bmt etc.

Post #3806

Jason Beck

Posted 8/25/2006 7:32:59 AM

Calyx Software

Group: Administrators
Last Login: 7/18/2008 1:42:09 PM
Posts: 94, Visits: 467

-Add the closing cost scenario directly to the template folder (example: C:\Program Files\Calyx Software\Point Data Server\filesync\TemplateSets\pnttempl\CCS).
-Open the PDS Admin site then go to Template Sets->List Template Sets
-Select Edit next to the template set
-Click the Rebuild Template Set button at the bottom of the page

Post #3835

Emmanuel Huna

Posted 8/31/2006 5:20:20 PM

www.ehuna.org

Group: Administrators
Last Login: 12/17/2008 10:36:11 PM
Posts: 258, Visits: 13,336

One more thing: if it's ok if the new template files appear at the branches the next day, you can enable the automatic rebuild of template sets:

This is covered in detail in the following article:

Q10843 - INFO: (v5.3) Chapter 15 - Template Set Organization
http://pdskb.calyxsoftware.com/article.aspx?id=10843

Scroll down to the section "Rebuilding template sets".

Disclaimer: this post carries no explicit or implied warranty. Nor is there any guarantee that the information contained in this post is accurate. It is offered in the hopes of helping others, but you use it at your own risk. The author will not be liable for any damages that occur as a result of using this post.

Post #3854

« Prev Topic | Next Topic »

Reading This Topic

Active Users: 0 (0 guests, 0 members, 0 anonymous members)

No members currently viewing this topic.

Forum Moderators: Emmanuel Huna, Bryan Telford, Jason Beck, Mike Thompson, BetaFisch

Permissions

All times are GMT -8:00, Time now is 12:32am