InstantForum.NET v4.1.4Calyx Software Message Boardhttp://messageboard.calyxsupport.com/support@calyxsoftware.comWed, 07 Jan 2009 17:21:16 GMT20http://messageboard.calyxsupport.com/Topic6470-19-1.aspxI just tried re-installing Point, and that fixed the problem. I'm sorry, I should have tried that first. Thanks for all who replied!</P><P>SteveFri, 29 Feb 2008 14:52:27 GMTslilleyhttp://messageboard.calyxsupport.com/Topic6470-19-1.aspxThank you for the responses. I tried copying the winpoint.ini from a working PC, but am still getting the same result. We are using Point 6.0b, and the PC is running Windows XP SP2.Fri, 29 Feb 2008 14:37:37 GMTslilleyhttp://messageboard.calyxsupport.com/Topic6470-19-1.aspxwhat version of Point and what version of windows?Fri, 29 Feb 2008 14:34:13 GMTBetaFischhttp://messageboard.calyxsupport.com/Topic6470-19-1.aspxCopy the Winpoint.ini of a working workstation to the new workstation. Problems like this are almost always some config error in winpoint.ini<br><br>You could compare the PDS section of the non-working ini to a working ini also to start the diag process.Fri, 29 Feb 2008 14:13:16 GMTisupporthttp://messageboard.calyxsupport.com/Topic6470-19-1.aspxHello,</P><P>I am getting the message, "Use Point Administrator to check that you have at least one enabled folder" when trying to login to Point. This is on a new PC, trying to run Point on it for the first time. We have a Point Data Server running the latest version, no other PCs are having this problem. If I go into Point Administrator to Point Data Server, Settings, and test the connection, it works fine. Any ideas?Fri, 29 Feb 2008 13:35:47 GMTslilley